Moving from plot-based to hillslope-scale assessments of savanna vegetation structure with long-range terrestrial laser scanning (LR-TLS)     

《International Journal of Applied Earth Observation and Geoinformation》2020

Reliable quantification of savanna vegetation structure is critical for accurate carbon accounting and biodiversity assessment under changing climate and land-use conditions. Inventories of fine-scale vegetation structural attributes are typically conducted from field-based plots or transects, while large-area monitoring relies on a combination of airborne and satellite remote sensing. Both of these approaches have their strengths and limitations, but terrestrial laser scanning (TLS) has emerged as the benchmark for vegetation structural parameterization – recording and quantifying 3D structural detail that is not possible from manual field-based or airborne/spaceborne methods. However, traditional TLS approaches suffer from similar spatial constraints as field-based inventories. Given their small areal coverage, standard TLS plots may fail to capture the heterogeneity of landscapes in which they are embedded. Here we test the potential of long-range (>2000 m) terrestrial laser scanning (LR-TLS) to provide rapid and robust assessment of savanna vegetation 3D structure at hillslope scales. We used LR-TLS to sample entire savanna hillslopes from topographic vantage points and collected coincident plot-scale (1 ha) TLS scans at increasing distances from the LR-TLS station. We merged multiple TLS scans at the plot scale to provide the reference structure, and evaluated how 3D metrics derived from LR-TLS deviated from this baseline with increasing distance. Our results show that despite diluted point density and increased beam divergence with distance, LR-TLS can reliably characterize tree height (RMSE = 0.25–1.45 m) and canopy cover (RMSE = 5.67–15.91%) at distances of up to 500 m in open savanna woodlands. When aggregated to the same sampling grain as leading spaceborne vegetation products (10–30 m), our findings show potential for LR-TLS to play a key role in constraining satellite-based structural estimates in savannas over larger areas than traditional TLS sampling can provide.  相似文献   

沿107.6°E南北向剖面鄂尔多斯地块及周缘地区地壳结构          下载免费PDF全文

陈洁  陈永顺  郭震  杨挺 《地球物理学报》2020,63(7):2592-2604

鄂尔多斯地块紧邻青藏高原东北缘,位于华北克拉通的西部,在我国中生代、新生代以来东部地区的构造活动中起到了重要作用.对鄂尔多斯及其周缘地区的研究可以提供有关华北克拉通的形成、演化和破坏过程的重要信息.本文选取了纵贯鄂尔多斯的107.6°E附近南北剖面上的44个流动地震台站进行分析,采用接收函数方法,进行Kirchhoff偏移成像,并且结合在该区域内前人的地震面波频散进行联合反演,获得剖面下方的地壳内部精细结构.研究结果显示:(1)莫霍面在鄂尔多斯北部较平缓,约45km深;在鄂尔多斯南部有所加深,达到50km;其北边的河套盆地的地壳厚度约为50km;南边的渭河盆地到秦岭地区及四川盆地的地壳厚度从约为40km增厚到47～50km.(2)河套盆地下方存在大规模的低速异常,最深可达25km,反映了其显著的拉张构造和沉积历史.(3)秦岭造山带下方的低速异常对应于其主要为长英质的地壳组分,可能是由于中生代的拆沉作用导致的地壳下部基性岩石层的缺失.(4)以38°N为界的鄂尔多斯地块,南北部地壳速度结构存在差异,可能表明了这两部分经历的构造历史不同.  相似文献   

Improving integrity of RC beam-column joints with deficient beam rebar anchorage     

Syafri Wardi  Yasushi Sanada  Nandita Saha  Susumu Takahashi 《地震工程与结构动力学》2020,49(3):234-260

In recent earthquakes in developing countries, severe damage was observed on reinforced concrete buildings. This study focuses on exterior beam-column joints with substandard beam rebar anchorage and seismic strengthening by installing wing walls. First, a series of experiments was conducted to investigate the seismic behavior of exterior joints with substandard beam rebar anchorage representing typical Bangladeshi buildings. Two 0.7-scaled exterior joint specimens were tested, and these specimens showed beam rebar anchorage failure and/or joint shear failure. Prior to strengthening of the joint, a series of pullout tests was conducted on postinstalled bonded anchors in low-strength concrete for strengthening design. Then, an experiment was performed to apply the strengthening method by wing walls to one of the exterior joint specimens to improve the integrity, and this method was intended to prevent the failure of beam rebar anchorage. The strengthening method is proposed to extend the development length of beam longitudinal bars by considering the embedment length along the wing walls. The test results verified the effectiveness and applicability of the proposed strengthening method to upgrade exterior RC beam-column joints with deficient beam rebar anchorage.  相似文献   

Quantifying terrain controls on runoff retention and routing in the Northern Prairies     

Igor Pavlovskii  Saskia L. Noorduijn  Jessica E. Liggett  Jeanette Klassen  Masaki Hayashi 《水文研究》2020,34(2):473-484

The role of hummocky terrain in governing runoff routing and focussing groundwater recharge in the Northern Prairies of North America is widely recognised. However, most hydrological studies in the region have not effectively utilised information on the surficial geology and associated landforms in large-scale hydrological characterization. The present study uses an automated digital elevation model (DEM) analysis of a 6500-km² area in the Northern Prairies to quantify hydrologically relevant terrain parameters for the common types of terrains in the prairies with different surficial deposits widespread in the prairies, namely, moraines and glaciolacustrine deposits. Runoff retention (and storage) capacity within depressions varies greatly between different surficial deposits and is comparable in magnitude with a typical amount of seasonal snowmelt runoff generation. The terrain constraint on potential runoff retention varies from a few millimetres in areas classified as moraine to tens of millimetres in areas classified as stagnant ice moraine deposits. Fluted moraine and glaciolacustrine deposits have intermediate storage capacity values. The study also identified the probability density function describing a number of immediate upstream neighbours for each depression in a fill-and-spill network. A relationship between depression parameters and surficial deposits, as well as identified depression network structure, allows parametrisation of hydrologic models outside of the high-resolution DEM coverage, which can still account for terrain variation in the Prairies.  相似文献   

城市场景结构感知的网格模型简化算法     

张春森  张会  郭丙轩  彭哲 《测绘学报》2020,49(3):334-342

针对二次误差测度(QEM)网格简化算法全局几何特征信息损失严重的缺点,提出一种具有结构感知功能面向城市三维模型重建的网格简化算法。该算法顾及城市影像中平面结构特征,以代理平面为全局特征约束条件,使模型在简化过程中全局结构特征更多地被保持,以利于多层次细节模型(LOD技术)、网格优化提速等模型后续操作。以倾斜摄影获取影像生成的初始三角网格模型为试验数据,采用所给算法对其进行网格简化并与QEM算法进行对比。结果表明:所给算法简化精度及简化效率均优于QEM算法。  相似文献   

Talus slope geomorphology investigated at multiple time scales from high-resolution topographic surveys and historical aerial photographs (Sanetsch Pass,Switzerland)     

Hanne Hendrickx  Lars De Sloover  Cornelis Stal  Reynald Delaloye  Jan Nyssen  Amaury Frankl 《地球表面变化过程与地形》2020,45(14):3653-3669

Talus slopes are common places for debris storage in high-mountain environments and form an important step in the alpine sediment cascade. To understand slope instabilities and sediment transfers, detailed investigations of talus slope geomorphology are needed. Therefore, this study presents a detailed analysis of a talus slope on Col du Sanetsch (Swiss Alps), which is investigated at multiple time scales using high-resolution topographic (HRT) surveys and historical aerial photographs. HRT surveys were collected during three consecutive summers (2017–2019), using uncrewed aerial vehicle (UAV) and terrestrial laser scanning (TLS) measurements. To date, very few studies exist that use HRT methods on talus slopes, especially to the extent of our study area (2 km²). Data acquisition from ground control and in situ field observations is challenging on a talus slope due to the steep terrain (30–37°) and high surface roughness. This results in a poor spatial distribution of ground control points (GCPs), causing unwanted deformation of up to 2 m in the gathered UAV-derived HRT data. The co-alignment of UAV imagery from different survey dates improved this deformation significantly, as validated by the TLS data. Sediment transfer is dominated by small-scale but widespread snow push processes. Pre-existing debris flow channels are prone to erosion and redeposition of material within the channel. A debris flow event of high magnitude occurred in the summer of 2019, as a result of several convective thunderstorms. While low-magnitude (<5,000 m³) debris flow events are frequent throughout the historical record with a return period of 10–20 years, this 2019 event exceeded all historical debris flow events since 1946 in both extent and volume. Future climate predictions show an increase of such intense precipitation events in the region, potentially altering the frequency of debris flows in the study area and changing the dominant geomorphic process which are active on such talus slopes. © 2020 John Wiley & Sons, Ltd.  相似文献   

Using visibility analysis to improve point density and processing time of SfM-MVS techniques for 3D reconstruction of landforms     

Álvaro Gómez-Gutiérrez  Trent Biggs  Napoleon Gudino-Elizondo  Paz Errea  Esteban Alonso-González  Estela Nadal Romero  José Juan de Sanjosé Blasco 《地球表面变化过程与地形》2020,45(11):2524-2539

Image network geometry, including the number and orientation of images, impacts the error, coverage, and processing time of 3D terrain mapping performed using structure-from-motion and multiview-stereo (SfM-MVS). Few studies have quantified trade-offs in error and processing time or ways to optimize image acquisition in diverse topographic conditions. Here, we determine suitable camera locations for image acquisition by minimizing the occlusion produced by topography. Viewshed analysis is used to select the suitable images, which requires a preliminary digital elevation model (DEM), potential camera locations, and sensor parameters. One aerial and two ground-based image collections were used to analyse differences between SfM-MVS models produced using: (1) all available images (ALL); (2) images selected using conventional methods (CON); and (3) images selected using the viewshed analysis (VIEW). The resulting models were compared with benchmark point clouds acquired by a terrestrial laser scanner (TLS) and TLS-derived DEMs. The VIEW datasets produced denser point clouds (28–32% more points) and DEMs with up to 66% reduction in error compared with CON datasets due to reduction of gaps in the DEM. VIEW datasets reduced processing time by 37–76% compared with ALL, with no reduction in coverage or increase in error. DEMs produced with ALL and VIEW datasets had similar slope and roughness, while slight differences that may be locally important were observed for the CON dataset. The new method helps optimize SfM-MVS image collection strategies that significantly reduce the number of images required with minimal loss in coverage or accuracy over complex surfaces. © 2020 John Wiley & Sons, Ltd.  相似文献   

小尺度网格层析速度建模方法在低幅构造区时深转换中的应用     

吕振宇  魏鹏 《地球物理学进展》2020,(1):339-344

渤海M油田区浅层多发育低幅构造,低幅构造区的地震数据对常规层析成像不够敏感,导致常规速度反演方法很难保证低幅构造速度建模的准确性,从而给时深转换工作带来较大误差.本文提出一种小尺度网格层析速度建模方法,该方法基于低幅构造的薄层信息,在有薄层信息的地层加密网格分布,从而实现根据地质条件划分网格的策略,进而通过解析矩阵方程实现速度模型的迭代更新.通过实际数据应用证明,对于渤海M油田利用本文提出的高精度网格层析速度建模方法是有效可行的,该方法能够有效提高低幅构造区速度建模的精度,利用该方法得到的速度模型能够大幅提高时深转换的精度,从而指导构造解释及成图工作.  相似文献   

2016年秋季热带西太平洋网采浮游植物群落结构   总被引：1，自引：0，他引：1  

陈卓  孙军  张桂成 《海洋科学》2018,42(7):114-130

作者于2016年9月27日～10月25日对热带西太平洋(0°～20°N, 120°～130°E)10个站位的网采浮游植物群落结构进行了采样调查。应用Uterm?hl方法对调查海域浮游植物的物种组成、细胞丰度、优势物种以及群落多样性等相关生态特征进行了分析。希望为热带西太平洋提供一些基础的背景资料,为以后的研究奠定基础。结果表明, 鉴定出浮游植物共计4门、66属、243种(包括变种、变型), 含硅藻门(Bacillariophyta)34属、103种, 甲藻门(Pyrrophyta)28属、133种, 金藻门(Chrysophyta)2属、4种,蓝藻门(Cyanophyta)2属、3种。浮游植物细胞丰度1 965.573×10³ 细胞/m³ , 其中蓝藻的细胞丰度为1 945.169×10³ 细胞/m³ , 决定了浮游植物的分布格局, 占总细胞丰度的98.96%, 高值区分布在0°N130°E-10°N130°E的4个站位(E130-13、E130-15、E130-17、E130-19); 硅藻丰度在20°N断面N20-4站位存在高值区; 甲藻丰度在130°E断面的3个站位(E130-10、E130-13、E130-15)存在高值区。本次调查的优势种依次为铁氏束毛藻(Trichodesmium thiebaultii)、扁形原甲藻(Prorocentrum compressum)、扁豆原甲藻(Prorocentrum leniculatum)、胞内植生藻(Richelia intracellularis)、菱形海线藻(Thalassionema nitzschioides)、细弱海链藻(Thalassiosira subtilis)、具边线形圆筛藻(Coscinodiscus marginato-lineatus)、科氏角藻(Ceratium kofoidii)、鲁比膝沟藻(Gonyaulax lurbynaii)、中华半管藻(Hemiaulus sinensis)、霍氏半管藻(Hemiaulus hauckii)、小等刺硅鞭藻(Dictyocha fibula)。Shannon-Weiner多样性指数的均值为2.440,Pielou 均匀度指数的均值为0.163。相关分析结果显示浮游植物空间分布主要受PO₄-P、NH₄-N的影响,且由蓝藻的相关性决定的。聚类分析得出群落结构分为大洋群聚和近岸群聚两种类型(其中大洋群聚的站位又划分为0°～10°N纬度范围聚集和10°～20°N纬度范围聚集)。  相似文献   

Otolith microchemistry indicates regional phylopatry in the larval phase of an amphidromous fish (Gobiomorphus hubbsi)     

Manna L. Warburton  Gerard P. Closs 《新西兰海洋与淡水研究杂志》2018,52(3):398-408

Knowledge of stock structure is key for the effective management of any fish species. Amphidromous fish, which live and spawn in freshwater but spend a pelagic larval period at sea, have typically been assumed to disperse widely during their larval phase, resulting in populations being sourced from a single unstructured larval pool. We used otolith microchemical analysis to examine the stock structure of bluegill bully (Gobiomorphus hubbsi), a declining amphidromous eleotrid endemic to New Zealand, along the west coast of South Island, New Zealand. Some drainages – even those in close proximity (c. 20?km) – were readily distinguishable based on otolith trace element concentrations, while little structure was evident between other geographically disparate locations. These results indicate that, at least in some cases, locally retained larvae, rather than a single unstructured larval pool, dominates recruitment. Management of bluegill bully and other amphidromous species must therefore consider the possibility of regionally distinct populations.  相似文献